ENDMILLS Metric Endmill Cutters HSS End mills 3mm 4mm 6mm 8mm 10mm 12mm 16mm 20mm 30mm 40mm Endmills Inch End mill HSS Endmills 1/16” 3/16 1/4 5/16 3/8 1/2” 5/8 3/4 1” 1.1/8” 1.1/4” 1.3/8 1.1/2 1.3/4”

The Tap & Die Co
445 West Green Road
London N15 3PL - UK
Tel:+44 (0)20 88881865
Fax:+44 (0)20 88884613
Email:
sales@tapdie.com
www.tapdie.com

LARGEST
On-line for
TAPS DIES Drills
or click: ‘Products’
Established since 1978

CURRENCY Converter

SITEMAP

ENDMILLS Metric Endmill Cutters HSS End mills 3mm 4mm 6mm 8mm 10mm 12mm 16mm 20mm 30mm 40mm
Endmills Inch End mill HSS Endmills 1/16” 3/16 1/4 5/16 3/8 1/2” 5/8 3/4 1” 1.1/8” 1.1/4” 1.3/8 1.1/2 1.3/4”
ENDMILLS multi-flute Threaded Shank - Right hand - Excellent quality
Endmills used for profile milling / finishing but not sinking (end teeth are not over-centre cutting)
Endmills produce openend slots or pockets (where plunge feed-in is not required) - British-made 1st quality - Manufactured to BS122 part 4

Products .. (click to view them)

END MILLS HSS			Our Prices
Endmills Cutters in Metric 1.50 to 50mm + Inch 1/16” to 2”			1 pc each
Size Dia x Shank d x Cut L	Inch Sizes x Shank d x Cut L	Order Code 620A	GBP (£ . p)
Endmill 1.5mm x 6 x 2.5		HEM01.5	13.50
	Endmill 1/16” x 1/4 x 3/32	HEI04	13.50
Endmill 2mm x 6 x 3		HEM02	12.78
	Endmill 3/32” x 1/4 x 1/4	HEI06	14.40
Endmill 2.5mm x 6 x 6.5		HEM02.5	14.40
Endmill 3mm x 6 x 9.5		HEM03	10.98
	Endmill 1/8” x 1/4 x 3/8	HEI08	10.98
Endmill 3.5mm x 6 x 12.5		HEM03.5	12.24
	Endmill 5/32” x 1/4 x 1/2	HEI10	11.70
Endmill 4mm x 6 x 12.5		HEM04	10.98
Endmill 4.5mm x 6 x 12.5		HEM04.5	12.24
	Endmill 3/16” x 1/4 x 1/2	HEI12	10.98
Endmill 5mm x 6 x 16		HEM05	10.98
Endmill 5.5mm x 6 x 16		HEM05.5	12.24
	Endmill 7/32” x 1/4 x 5/8	HEI14	11.70
Endmill 6mm x 6 x 16		HEM06	10.98
	Endmill 1/4” x 1/4 x 5/8	HEI16	10.98
Endmill 6.5mm x 10 x 16		HEM06.5	15.48
Endmill 7mm x 10 x 15		HEM07	15.48
	Endmill 9/32” x 3/8 19/32	HEI18	17.82
Endmill 7.5mm x 10 x 18		HEM07.5	16.38
	Endmill 5/16” x 3/8 x 23/32	HEI20	14.40
Endmill 8mm x 10 x 18		HEM08	14.40
Endmill 8.5mm x 10 x 18		HEM08.5	16.74
	Endmill 11/32” x 3/8 x 27/32	HEI22	17.82
Endmill 9mm x 10 x 21		HEM09	16.20
Endmill 9.5mm x 10 x 21		HEM09.5	17.10
	Endmill 3/8” x 3/8 x 27/32	HEI24	14.40
Endmill 10mm x 10 x 21		HEM10	14.40
Endmill 10.5mm x 12 x 19		HEM10.5	19.80
	Endmill 13/32” x 3/8 x 7/8		19.08
Endmill 11mm x 12 x 19		HDM11	18.90
	Endmill 7/16” x 1/2 x 3/4	HEI28	19.08
Endmill 11.5mm x 12 x 22.5		HEM11.50	21.24
	Endmill 15/32” x 1/2 x 7/8	HEI30	20.34
Endmill 12mm x 12 x 24		HEM12	18.36
	Endmill 1/2” x 1/2 x 15/16	HEI32	17.82
Endmill 13mm x 12 x 24.5		HEM13	21.78
	Endmill 17/32” x 1/2 x 1-1/8	HEI34	25.74
Endmill 14mm x 12 x 28.5		HEM14.00	21.24
	Endmill 9/16” x 1/2 x 1-1/8	HEI36	25.20
Endmill 15mm x 16 x 26.5		HEM15	27.36
	Endmill 19/32” x 5/8 x 1-1/16	HEI38	30.60
	Endmill 5/8” x 5/8 x 1-1/16	HEI40	24.84
Endmill 16mm x 16 x 26.5		HEM16	24.66
	Endmill 21/32” x 5/8 x 1-1/4	HEI42	31.50
Endmill 17mm x 16 x 32		HEM17	33.66
	Endmill 11/16” x 5/8 x 1-3/8	HEI44	33.66
Endmill 18mm x 16 x 35		HEM18	28.80
	Endmill 23/32” x 5/8 x 1-1/2	HEI46	36.90
Endmill 19mm x 16 x 38		HEM19	38.70
	Endmill 3/4” x 5/8 x 1-1/2	HEI48	32.40
	Endmill 25/32” x 5/8 x 1-12	HEI50	49.50
Endmill 20mm x 16 x 38		HEM20	32.40
	Endmill 13/16” x 5/8 x 1-12	HEI52	62.10
Endmill 21mm x 25 x 38		HEM21	59.40
Endmill 22mm x 25 x 41.5		HEM22	57.60
	Endmill 7/8” x 1 x 1-5/8	HEI56	63.00
Endmill 23mm x 25 x 41.5		HEM23	70.20
	Endmill 15/16” x 1 x 1-5/8	HEI60	63.00
Endmill 24mm x 25 x 41.5		HEM24	66.60
Endmill 25mm x 25 x 44.5		HEM25	57.60
	Endmill 1” x 1 x 1-11/16	HEI64	56.70
Endmill 26mm x 25 x 43		HEM26	86.40
	Endmill 1.1/16” x 1 x 1-11/16	HEI68	81.00
Endmill 28mm x 25 x 46		HEM28	75.60
	Endmill 1.1/8” x 1 x 1-13/16	HEI72	81.00
Endmill 30mm x 25 x 46		HEM30	84.60
	Endmill 1.3/16” x 1 x 1-13/16	HEI76	100.80
	Endmill 1.1/4” x 1 x 1-15/16	HEI80	100.80
	Endmill 1.1/4” x 1 x 1-1/4	HEI80#	100.80
Endmill 32mm x 25 x 49		HEM32	100.80
Endmill 34mm x 25 x 49		HEM34	136.80
	Endmill 1.3/8” x 1 x 2-1/16	HEI88	138.60
	Endmill 1.3/8” x 1-1/4 x 2-1/8	HEI88#	138.60
Endmill 35mm x 32 x 54		HEM35	126.00
Endmill 36mm x 32 x 54		HEM36	133.20
	Endmill 1.7/16” x 1 x 2-1/16	HEI92	160.20
	Endmill 1.7/16” x 1-1/4 x 2-1/8	HEI92#	160.20
Endmill 38mm x 32 x 54		HEM38	153.00
	Endmill 1.1/2” x 1 x 2-3/16	HEI96	138.60
	Endmill 1.1/2” x 1-1/4 x 2-1/8	HEI96#	138.60
Endmill 40mm x 32 x 55.5		HEM40	151.20
	Endmill 1.5/8” x 1 x 2-3/8	HEI104	203.40
	Endmill 1.5/8” x 1-1/4 x 2-1/8	HEI104#	203.40
Endmill 42mm x 32 x 54		HEM42	163.80
Endmill 44mm x 32 x 57		HEM44	219.60
	Endmill 1.3/4” x 1 x 2-1/12	HEI112	208.80
	Endmill 1.3/4” x 1-1/4 x 2-1/4		208.80
Endmill 45mm x 32 x 57		HEM45	183.60
	Endmill 1.7/8” x 1-1/4 x 2-7/16	HEI120	217.80
Endmill 50mm x 32 x 65		HEM50	243.00
	Endmill 2” x 1 x 2-3/4	HEI128	234.00
	Endmill 2” x 1-1/4 x 2-9/16		234.00
Endmills in LONG LENGTHS sizes in stock in above sizes Endmills in PLAIN & FLATTED shanks in stock in above sizes - Ask