SHELL ENDMILL Cutters Inch Shell End Mill cutter 1.1/4” 1.1/2” 1.3/4” 2” 2.1/4” 2.1/2” 2.3/4” 3” 4” 5” 6” Shell Endmills Metric Cutter 40mm 50mm 63mm 80mm 100mm 125mm 160mm End Mill Shell Cutter

The Tap & Die Co
445 West Green Road
London N15 3PL - UK
Tel:+44 (0)20 88881865
Fax:+44 (0)20 88884613
Email:
sales@tapdie.com
www.tapdie.com

LARGEST
On-line for
TAPS DIES Drills
or click: ‘Products’
Established since 1978

CURRENCY Converter

SITEMAP

SHELL ENDMILL Cutters Inch Shell End Mill cutter 1.1/4” 1.1/2” 1.3/4” 2” 2.1/4” 2.1/2” 2.3/4” 3” 4” 5” 6”
Shell Endmills Metric Cutter 40mm 50mm 63mm 80mm 100mm 125mm 160mm End Mill Shell Cutter
SHELL END MILLS HSS Bore-type - Excellent quality
Shell endmills equipped with teeth on the periphery and at one end. A drive slot is provided at the back of the mill which may be used with standard endmill arbors. For righthand rotation with righthand helical cutting edges
Shell endmills are used for end ( Face ) milling - British-made 1st quality

Products .. (click to view them)

SHELL END MILLS HSS				Our Prices
Shell endmills Inch Sizes (BS122)				1 pc each
Diameter D inch	Length	Bore dia	Order Code 510	GBP (£ . p)
Shell End Mills 1-1/4”	1”	1/2”	HBSEI80x64	82.00
Shell End Mills 1-1/2”	1-1/8”	1/2”	HBSEI96x72	90.00
Shell End Mills 1-3/4”	1-1/4”	3/4”	HBSEI112x80	94.00
Shell End Mills 2”	1-3/8”	3/4”	HBSEI128x88	106.00
Shell End Mills 2-1/4”	1-1/2”	1”	HBSEI144x96	126.00
Shell End Mills 2-1/2”	1-5/8”	1”	HBSEI160x104	144.00
Shell End Mills 2-3/4”	1-5/8”	1”	HBSEI176x104	160.00
Shell End Mills 3”	1-3/4”	1-1/4”	HBSEI192x112	174.00
Shell End Mills 3-1/2”	1-7/8”	1-1/4”	HBSEI224x120	238.00
Shell End Mills 4”	2-1/4”	1-1/2”	HBSEI256x144	350.00
Shell End Mills 4-1/2”	2-1/4”	1-1/2”	HBSEI288x144	430.00
Shell End Mills 5”	2-1/4”	1-1/2”	HBSEI310x144	530.00
Shell End Mills 6”	2-1/4”	2”	HBSEI374x144	750.00
Shell End Mills available in other sizes - Ask

SHELL END MILLS HSS				Our Prices
Shell endmill Metric Sizes (DIN1880)				1 pc each
Diameter D metric	Length	Bore dia	Order Code 510	GBP (£ . p)
Shell endmills - STANDARD
Shell End Mills 40mm	32mm	16mm	HBSEMS40x32	96.00
Shell End Mills 50mm	36mm	22mm	HBSEMS50x36	108.00
Shell End Mills 63mm	40mm	27mm	HBSEMS63x40	144.00
Shell End Mills 80mm	45mm	27mm	HBSEMS80x45	200.00
Shell End Mills 100mm	50mm	32mm	HBSEMS100x50	340.00
Shell End Mills 125mm	56mm	40mm	HBSEMS125x56	530.00
Shell End Mills 160mm	63mm	50mm	HBSEMS160x63	920.00
Shell endmills - FINE
Shell End Mills 40mm	32mm	16mm	HBSEMF40x32	120.00
Shell End Mills 50mm	36mm	22mm	HBSEMF50x36	132.00
Shell End Mills 63mm	40mm	27mm	HBSEMF63x40	140.00
Shell End Mills 80mm	45mm	27mm	HBSEMF80x45	220.00
Shell End Mills 100mm	50mm	32mm	HBSEMF100x50	380.00
Shell End Mills 125mm	56mm	40mm	HBSEMF125x56	560.00
Shell End Mills 160mm	63mm	50mm	HBSEMF160x63	1020.00
Shell endmills - COARSE
Shell End Mills 40mm	32mm	16mm	HBSEMC40x32	122.00
Shell End Mills 50mm	36mm	22mm	HBSEMC50x36	136.00
Shell End Mills 63mm	40mm	27mm	HBSEMC63x40	164.00
Shell End Mills 80mm	45mm	27mm	HBSEMC80x45	222.00
Shell End Mills 100mm	50mm	32mm	HBSEMC100x50	384.00
Shell End Mills 125mm	56mm	40mm	HBSEMC125x56	560.00
Shell End Mills 160mm	63mm	50mm	HBSEMC160x63	1020.00
Shell End Mills available in other sizes - Ask