WOODEN BOX TAPS, DIES, HOLDERS British-made (computer-designed) in: BSW, BSF, UNC, UNF, BSCycle, BA, Metric, Model Engineer containing: taps 1 Taper + 1 Bottoming(plug) + 1 die + tapwrench(es) + diestock(s)
Excellent quality HQS taps & dies (tougher & better alternative to HSS) which cuts superbly even into stainless - LOWEST prices found here, as huge discounts given
SAME DAY DESPATCH as over 500 boxes always on the shelf

WOODEN BOX DIENUTS British-made (computer-designed)
in:  BSW, BSF, UNC, UNF, Metric sizes
containing Hexagon DIENUTS   (excellent quality)

Used for cleaning & restoring threads & can be used with hexagon-spanners
 

Metal Box TAPS in AWARD-winning boxes
in:  Metric, BSCycle, BSW, BSF, UNC, UNF, BA, Model Engineer sizes
Each box contains all T(=Tapers)  or  S(=Seconds) or B(=Bottomings/plugs
Excellent HQS quality (tougher & better alternative to HSS) cuts superbly into stainless

Note: HSSGT 'Spiral-Pointed' Taps also in Metal Boxed Sets = ASK for prices

Metal Box DIES in AWARD-winning boxes
in:  Metric, BSCycle, BSW, BSF, UNC, UNF, BA, Model Engineer sizes
Excellent quality round split-adjustable dies

Dies are used for cutting  or  cleaning external threads
Excellent HQS quality (tougher & better alternative to HSS) cuts superbly into stainless

Metal Box DIENUTS (Hexagon) in AWARD-winning boxes
in:  Metric, BSW, BSF, UNC, UNF  Dienuts sizes (hexagon-shaped)

Used for cleaning & restoring threads & can be used with hexagon-spanners
 

DRILL BOXES contains a range of the most popular drills in HSS
in:  Number, Metric, Inch or Letter sizes

Packed in Metal-boxes  or  in flat-pack plastic boxes
 

TAPS - EXCELLENT quality
Taps are in: TAPERS(T), SECONDS(S), BOTTOMING(B)/plug
Tapers, Seconds are for ‘through’ holes & Bottomings are for ‘blind’ hole tapping
Metric, BSW, BSF, UNC, UNF, BSCycle, Model Engineer, BA, BSBrass, BSPipe, BSPT, NPT, Specials -  Order from the LARGEST company offering every type/size & delivered to your door anywhere in the world  - Even 1 tap is supplied

DIES are round Split-adjustable - EXCELLENT quality
Used for making new or restoring threads - Used on machines or with die-holders
Made in: 13/16”od, 1”od, 1.5/16”od, 1.1/2”od, 2”od etc
 - Even 1 die is supplied -
Metric, BSW, BSF, UNC, UNF, BSCycle, Model Engineer, BA, BSBrass, BSPipe, BSPT, NPT, Specials

DIENUTS - Excellent quality - hexagon-shape
Used for cleaning & restoring threads & can be used with hexagon-spanners
- Even 1 dienut is supplied -
Metric, BSW, BSF, UNC, UNF, BSPipe - ask for all other types

Tap-Holders (=Tapwrenches)
 in bar-type
 Holds a range of different sizes of taps - ask for all other types/sizes
- Even 1 tapholder is supplied -
 

Die-Holders (=Diestocks)
 Holds a range of different sizes of
round split-adjustable dies - ask for all other types/sizes
- Even 1 dieholder is supplied -
 

   JOBBER DRILLS (HSS, Straight Shank, All Right-hand)
 150A HSS Drill: General purpose -BS328 /DIN338, in 0.2mm to 20mm, Inch 1/64” to 3/4”, No1 to 80
 150B HSS Drill Blanks: Hardened/ground, Use as gauges, drifts, punches, locating pins,spindles
 150M Super-Cobalt: To drill v. high tensile material (AISI M42 - 8% Co)
 160A Left-hand: General purpose for LEFT-hand drilling
 170A Quick Helix &  175A Slow Helix: For efficient special material drilling

   TAPER SHANK DRILLS (HSS, MTS=Morse Taper Shank)
 200A MTS: General purpose - DIN345, in Metric 2 to 100mm, Inch 1/64 to 4”
 200M Super-Cobalt: To drill v. high tensile material (AISI M42 - 8% Co)
 200C MTS Chip-breaker: Special ridge in flutes help break up swarf preventing long spirals -Ask
 200H MTS Slow-Helix &  200W MTS Quick-Helix: For efficient special material drilling -Ask

   LONG DRILLS (HSS, Straight Shank, All Right-hand)
 Standard drills but with INCREASED cutting-length
 190A HSS Drill: General purpose -BS328 /DIN338 in 0.5mm to 30mm, Inch 1/32 to 1.1/2”, No1 to 80
 190M Super-Cobalt: To drill v. high tensile material (AISI M42 - 8% Co)
 190H Slow-Helix & 190W Quick-Helix: For efficient special material drilling -Ask
 190S Split-Point: Similar to 190A -has ‘split-point’ & is anti-skid point, for construction industry

   STUBDRILLS (HSS, Straight Shank, All Right-hand)
 Used with portable drills & for drilling wide range of materials.  Used where increased rigidity is required & short-length drilling. Called ‘extra-short’drills & in USA as ‘screw-machine’ drills
 180A HSS Stub Drill: General purpose -BS328 /DIN1897RN, in 0.8mm to 40mm, Inch 1/32” to 1.1/2”
 180M Super-Cobalt: To drill v. high tensile material (AISI M42 - 8% Co)
 181A Left-hand: General purpose for LEFT-HAND drilling

   BLACKSMITH  DRILLS 1/2” dia (HSS, All Right-hand)
 1/2” dia. Straight Shank HSS Drills
 Drills of dia. 1/2” or greater  - Can be used in 1/2” or 13mm capacity chucks
 265A Metric: Sizes from 13.5mm to 38mm
 265B Inch:   Sizes from 1/2” to 1.1/2”
 

   CENTRE  DRILLS (HSS, All Right-hand)
 HSS Centre Drills - Double-ended drills - Combined Drills & Countersinks
 To produce accurate centre-holes
 280A Metric:   Metric to DIN333 - Sizes from 1mm to 12.5mm
 280B Inch:   Inch to BS328 - Sizes from 1/8” to 3/4” (BS-1 to BS-7)
 

     CARBIDE-TIPPED DRILLS (HSS Body, All Right-hand)
   Have ‘Slow Helix’ angle. - For drilling high tensile materials, castings, cast iron, bronze & bearing metal, provided that rigid & efficient machines are used
 290A Straight Shank: Metric to DIN8037 from 3mm - 16mm  & Inch to DIN338 from 1/8” - 1/2”
 295A MTS (Morse Taper Shank): Metric to DIN8041 from 8mm-38mm & Inch to DIN345 from 1/8”-1/2”

     MASONRY DRILLS (HSS Body, All Right-hand)
 Carbide-Tipped - Unblended-point - Configured for drilling masonry & brick
 300A Straight Shank Masonry Drills:
   Metric to DIN8037 from 3mm - 38mm & Inch to DIN338 from 1/8” - 1.1/2”
 

   REAMERS (HSS, Spiral-flute, Straight-shank All Right-hand)
 400A Hand: With square-end, parallel-cut from 1.5mm to 41mm & 1/16” to 1.5/8”
 415A Chucking: Machine-reaming ‘through’ & most ‘blind’ holes
 438A Machine: (No square-end) Machine-reaming ‘through’ holes
 440A MTS Machine: Machine-reaming ‘through’ holes
 445A MTS Chucking: Machine-reaming ‘through’ & most ‘blind’ holes

   TAPER PIN REAMERS (HSS, All Right-hand)
 For reaming tapered holes
 425A Hand Taper Pin Reamers: Straight-flute with square-end
 446W Machine: Straight-flute with MTS (Morse Taper Shank) -Ask
   Inch sizes:  have 1:48 taper - from 1/16” to 1”  -    Metric sizes: have 1:50 taper - from 1.5mm to 50mm

   EXTRA LONG REAMERS (HSS, All Right-hand)
 MTS (Morse Taper Shank) Machine Reamers with extra cutting length. Not for reaming ‘blind’ holes
 447A: Morse Taper Shank Parallel-cut Machine Reamers. Long-flute type
   Metric sizes: from 6mm to 25mm ranging in in lengths of: 200mm, 250mm, 300mm, 350mm, 400mm
   Inch sizes:  from 3/16” to 1.1/4” ranging in lengths of: 8”, 10”, 12”, 15”, 18”

   SOCKET REAMERS (HSS, All Right-hand)
 For reaming tapered Sockets to receive Morse Taper shafts from 0MT to 6MT to DIN 228 / BSS1660
  451A Hand (for ‘finishing’): Straight-flute, Straight-shank, with Square
  452A MTS (for ‘roughing’): Helical-flute, MTS, with chip-breakers throughout cutting length
  453A MTS (for ‘finishing’): Straight-flute, MTS

   BRIDGE REAMERS (HSS, All Right-hand)
 For rectification of mis-alligned holes. Called ‘Boiler-makers’ or ‘Rivet-hole’ or ‘Allignment’ reamers.
 Has a Taper-lead of 1:10 over 1/3rd of cutting length in BS122 for ‘inch’ & DIN311 for ‘metric’
 448A MTS Bridge Reamers: Has left-hand helical flutes
   Inch sizes:  from 3/8” to 1.9/16”    -     Metric sizes:  from 6.4mm to 40mm

   ENDMILLS (Multi-flute)
   For profile milling/finishing, but not sinking (end teeth are not over-centre cutting). Produces open end slots or pockets (where plunge feed-in is not required) - (threaded-shank
 520A & 620A: Standard length in Metric sizes from 1.5mm - 50mm & Inch sizes from 1/16”- 2”
 520L & 620L: Long Length in Metric sizes from 3mm - 50mm & Inch sizes from 1/16”- 2” (Ask)
   (Note: Plain & Flatted Shank Endmills are also manufactured/supplied to DIN series - ask)

   SLOTDRILLS (2-flute, centre-cutting)
   For milling, drilling/sinking, since (end teeth are over-centre cutting). Used for side and end cutting; for key-seating; milling of closed slots (by means of a ‘plunge’ feed-in) - (threaded-shank)
 525A & 625A: Standard length in Metric sizes from 1.5mm - 50mm & Inch sizes from 1/16”- 2”
 525L & 625L: Long Length in Metric sizes from 3mm - 45mm & Inch sizes from 1/16”- 2” (Ask)
   (Note: Plain & Flatted Shank Endmills are also manufactured/supplied to DIN series - ask)

   COMBI-MILLS (3-flute, centre-cutting)
  Multi-purpose tool: half End-mill & half Slot-drill, but greater number of teeth increase milling rates.  Made only in Metric sizes in Super-Cobalt - (threaded-shank) - to DIN 327
 623A & 623V: Threaded + flatted shank in Standard & Long length in Metric from 2.5mm - 25mm
 623B: With flatted-shank in Standard length in Metric from 3mm to 25mm (Ask)

   BALL NOSED SLOTDRILLS (2-flute, centre-cutting)
   Ball-end for milling slots with a radius bottom, die sinking, fillets, rounding bottoms of holes, patterns making, etc. As the 2-flutes are end cutting to centre the initial penetration can be ‘plunge’ fed. - (threaded-shank) - to BS122 part 4
 526A: Standard length in Metric sizes from 2mm - 32mm & Inch sizes from 1/16” - 1.1/2”
 526L: Long Length in Metric sizes from 3mm - 30mm & Inch sizes from 1/8” - 1.1/2” (Ask)

   CORNER ROUNDING CUTTERS (centre-cutting)
   For milling convex corner radii up to a quarter-circle on a component - CNC form ground straight teeth - (threaded-shank) - British series
 536A: Metric sizes from Radius 1mm - Radius 20mm & Inch sizes from Radius 1/8” - Radius 1/2”
 636A: (Flatted Shank) in Inch sizes from Radius 1mm - Radius 20mm

   DOVETAIL SLOT CUTTERS (cutting on angle & face)
   For producing 45^o and 60^o angles for dovetails slideways in machine tool tables, jigs, fixtures, etc - (threaded-shank) - British series - (Flatted shank are also manufactured/supplied - ask)
 53A  Dovetail Cutters: Metric sizes in 45^o & 60^o with Head dia 13mm - 50mm &
               Inch sizes in 45^o & 60^o with Head dia 5/8” - Radius 1.1/2”

   T SLOT CUTTERS (side & face cutting)
   For cutting T-slots in machine tables and similar applications. They cut top and bottom, so can be used in many different situations. Used extensively for bolt slots. - (threaded-shank) - British series - (Flatted Shank Staggered Tooth T-Slot are also manufactured/supplied - ask)
 534A T-Slot Cutters: Metric sizes from M6 - M36 with Head dia 12.5mm - 60mm & Inch sizes from 1/4” - 1”  with Head dia 37/64” - 1.61/64”

   WOODRUFF KEYSEATING CUTTERS (Alternate Right & Lefthand Angled Teeth)
   For cutting seatings in shafts for Woodruff keyways. Wide application in groove-cutting. They cut only on the end teeth, not on the sides -(threaded-shank) -British series -(Flatted & Plain Shank also manufactured)
 535A Woodruff Keyseating Cutters: Metric Key from M2 - M10 with Head dia 10.5mm - 45.5mm & 
             Inch Key from 204 - 1212 with Head dia 1/2” - 1.1/2”

   PLAIN & HELICAL MILLS
 501 Plain Mills: For general purpose metal removal, provides a fair surface finish   
 502 Helical Mills: For high volume with surface finish for light alloys
 In: Metric sizes with dia: 40-125mm &  Inch sizes with dia: 2.1/2”-5”

   SIDE & FACE SLOTTING CUTTERS
They cut on top and on both sides for slotting
  503 Plain Teeth: Straight teeth: For Side & Face milling, Straddle milling + cutting slots
  504 Staggered Teeth: Alternate right & left hand helical teeth. For milling deep slots & rapid metal removal. Ensure smooth cutting& good surface finish (Ask)
 In: Metric sizes with dia: 63-200mm; width: 4-25mm; Bore: 22-40mm
               Inch sizes with dia: 2.1/2”-10”; width: 3/16”-1”; bore: 1”- 1.1/2”

   SINGLE & DOUBLE ANGLE CUTTERS
  507 Single Angle: Right & Left hand cutters. Have teeth on angular face & the larger flat side. Supplied either as Right hand or Left hand
  509 Double Angle: Cutters with two equal angular sides. Used for cutting serration, angular slots or chamfers
 In: Inch & Metric sizes with Angles: 30^o to 90^o; dia: 2.3/4”-3.1/2”; width: 5/16”-3/4”;
 bore: 1”- 1.1/4”(and metric in similar equivalents)

   SHELL END MILLS
  510 Shell End Mills: Equipped with teeth on the periphery and at one end. Adrive slot is provided at the back of the mill which may be used with standard end mill arbors
In: Metric sizes in Standard, Fine & Coarse with dia: 40-60mm; length: 32-63mm; Bore: 16-50mm
     Inch sizes with dia: 1.1/4”-6”; length: 1”-2.1/4”; bore: 1/2”- 2”  

   INVOLUTE GEAR CUTTERS
 512 Involute Gear Cutters: HSS Solid Cutters for generating teeth of straight gears. To cut gear pitches in standard Diametral Pitch(DP) or Modular (MM) System. For each DP or MM, 8 cutters are required to produce a full set of gears from 12 teeth to a rack and 8 cutters are made for each module - When ordering state whether require 14.1/2^o or 20^oPA (Pressure Angle). These cutters may be resharpened without changing their original form
In: Metric sizes with Modular(MM): 0.5mm-20mm; bore:16-50mm in 14.1/2^oPA or 20^oPA
     Inch sizes with Diametral Pitch(DP): 48-1”; bore 1”-2” in 14.1/2^oPA or 20^oPA

   CONVEX & CONCAVE CUTTERS
 HSS solid cutters for milling Concave or Convex forms
  513 Convex: for milling concave forms on components (ie.milling concave half circles)
  514 Concave: for milling convex forms on components (ie.milling convex half circles)
Both in: Metric sizes radius: 1-20mm; Cutter dia: 50-125mm; width: 2-60; Bore: 16-32mm
 Inch sizes radius: 3/32”-1.1/2”; Cutter dia: 2.1/4-4.1/4”; width: 5/16-2.1/4”; Bore: 1-1.1/4”

   TOOLBITS (HSS, Square, Round, Rectangular)
        T 18M HSS Grade: General Purpose Grade in HSS - Hardened and Ground
   SQUARE Toolbits   or ROUND Toolbits   or   RECTANGULAR Toolbits:
    in Inch sizes from 1/8” to 1” dia   & Metric sizes from 2mm - 25mm

   SLITTING SAWS (HSS, Circular, Bright-finish)
   HSS Circular Saws for Metal cutting.  Sizes in 60 or 72 or 90 teeth(=z) in 5/8” or 1” bore are designed primarily for Slotting Screw Heads. Saws upto 2”dia are without keyways (over 2” with keyways)
 517 Slitting Saws: Metric sizes with Dia: 20-160m & Inch sizes with Dia: 3/4-12”

   SIDE-RELIEF SLITTING SAWS (HSS, with Side Chip Clearance)
   HSS Circular Saws for Metal cutting. They have  side relief for ease of chip clearance. Recommended for deep cuts. Saws 5/32”(4mm) and over have alternate left & right staggered teeth of helical form. Under 5/32”(4mm) saws have uniform straight teeth.
 518: Metric sizes with Dia: 63-200mm; width: 1.6-12mm; bore: 22-40
           Inch sizes with Dia: 3”-10”; width: 1/16”-3/8”; bore: 1”-1.1/4”